Panasonic WV-NS202AE Network Operating Instructions Download Page 3 | Manualshive

Page: 3 / 90

background image

3

Preface

About these operating instructions

There are 2 sets of operating instructions for the WV-NS202A as follows.

• Installation Guide
• Network operating instructions

These network operating instructions contain descriptions of how to operate this product using a PC via a network
and of how to configure the settings.
Refer to the installation guide for descriptions of how to install this product and of how to connect to a network.
Adobe

®

Reader is required to read PDF. When the Adobe

®

Reader is not installed on the PC, download the latest

Adobe

®

Reader from the Adobe web site and install it.

Trademarks and registered trademarks

• Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

• SD logo is a trademark.
• Other names of companies and product contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

Viewer software

• Images will not be displayed when the viewer software "Network camera View3" is not installed on the PC. Install

the viewer software from this product or from the provided CD-ROM.

Important:

• The default setting of "Automatic installation of Viewer

software" is "ON". Follow the instructions on page 87
when the message is displayed on the information bar of
the browser.

• When the "Live" page is displayed for the first time, the

install wizard of the ActiveX control required to display
images from the camera will be displayed.
Follow the instructions of the wizard.

• When the install wizard is displayed again even after

completing the installation of the ActiveX, restart the PC.

• The viewer software used on each PC should be licensed individually. The number of installations of the viewer

software from the camera can be checked on the [Upgrade] tab of the "Maintenance" page (

☞

page 77). Refer to

your dealer for the software licensing.

«
1
2
3
4
5
...
»

Summary of Contents for WV-NS202AE



























































































Reviews:

No comments

Related manuals for WV-NS202AE

Brand: Samsung Pages: 1

Brand: Samsung Pages: 2

Brand: Samsung Pages: 92

Brand: Samsung Pages: 16

Brand: Samsung Pages: 82

Brand: Samsung Pages: 2

Brand: Samsung Pages: 118

Brand: Samsung Pages: 40

Brand: Samsung Pages: 101

Brand: Samsung Pages: 19

Brand: Samsung Pages: 2

Brand: Ganz Thermal Pages: 2

Brand: Lorex Pages: 2

ED 14-42mm f3.5-5.66 EZ

Brand: Olympus Pages: 15

NAC-HD-329VL/60

Brand: Navaio Pages: 2

Brand: Grundig Pages: 40

Brand: Olympus Pages: 202

Brand: Zumimall Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands