![background image](http://html.mh-extra.com/html/panasonic/wv-cs850b/wv-cs850b_service-manual_277861023.webp)
Note: Align the small projection of the Camera Head and
the black line on the Upper Plate as shown in Fig.
4-5-4.
Fig. 4-5-3
Fig. 4-5-4
8
Adjust the Lens for the fully wide angle position using the
Remote Controller.
8
Loosen two screws that secure the Sensor Section of the
Main Board as shown in Fig. 4-5-5.
Fig. 4-5-5
8
Observing the Monitor Screen, adjust the position of the
Sensor Section so that the hole on the Bottom Plate
comes to the center of the Monitor Screen as shown in
Fig. 4-5-6.
Fig. 4-5-6
8
Adjust the position of the Sensor Section so that the
horizontal black line on the Bottom Plate aligns to the
horizontal line on the Monitor Screen as shown in Fig. 4-5-
6
8
Repeat above adjustment until the hole position remains
at the center of the Monitor Screen while zooming in/out of
the Lens.
8
Fasten two screws on the Sensor Section of the Main
Board.
Cross-line
Black Line
on the Bottom Plate
Hole on the Bottom Plate
Loosen two screws.
Sensor Section
(Main Board)
Black Line on the Top Plate
Digital Section
(Main Board)
Projection
Camera Head
CCD Mounting
Adjustment Jig
– 2-19 –