4.3.2 Starting E.V.R. Adjustment Program
8
Insert new floppy disk containing DOS Operating System
and the E.V.R. Adjustment Program into IBM PC/AT and
turn on the IBM PC/AT.
8
At the prompt, type RADJ2 CS85BETL and press the
ENTER key, then the initial menu page as shown in Fig. 4-
3-3 will be displayed.
Fig. 4-3-3
4.3.3. Saving the Adjustment Data
This saving procedure is recommended to keep the current
adjustment status of the camera.
8
Press the SAVE (F5) key of the computer, and the
computer will ask you for the file name.
8
Type xxxxxxxx.EV2 CC0 14CA. Give an appropriate file
name for xxxxxxxx within 8 letters, but do not use
CS854BE.
8
Press the ENTER key.
4.3.4. Loading the Adjustment Data
This loading procedure is recommended to return the
adjustment status of the camera to the factory default setting
or the setting you saved before.
8
Press the LOAD (F1) key of the computer, and the
computer will ask you for the file name.
8
Type CS854BE.EV2 or xxxxxxxx.EV2 (xxxxxxxx means
a file name you named before.) and press the ENTER
key.
4.3.5. Adjustment Procedure
3
Adjustment
Q
Select the item "1. PAN/TILT POSITON-1" with the
ARROW key and press the ENTER key.
W
Wait until the camera stops moving.
E
When the camera stops, place the camera aiming the
white paper as shown in Fig. 4-3-2.
R
Adjust the lens tilt position using the E.V.R. Adjustment
Kit so that the center line on the chart overlays with the
line on the Video Monitor as shown in Fig. 4-3-4.
Fig. 4-3-4
T
Press the ENTER key.
y
Repeat
w
-
r
,and press ENTER key.
3
Confirmation of the result
Q
Turn off the power and on again.
W
Move the tilt position towards the horizontal level using
the E.V.R. Adjustment Kit.
E
Confirm the horizontal line stops at the center line of the
Video Monitor.
R
If the horizontal line does not stop at the center line,
press ESC key, and select the item "3. TILT RE-ADJ"
with the ARROW key and press the ENTER key.
T
Repeat "Adjustment" until the horizontal lines overlay
each other.
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
M E N U
PANASONIC REMOTE EVR ADJUSTMENT SYSTEM CCTV PRODUCT: CS850 EEPROM: 3
<INSTRUCTION> PLEASE CHOOSE MENU DATA BY ARROW-KEY
LOAD(F1)
QUIT(F3)
SAVE(F5)
N T S C
P a g e ( 1 / 1 )
1. PAN/TILT POSITION-1
2. PAN/TILT POSITION-2
3. TILT RE-ADJ
4. PAN/TILT POSITION-1
5. PAN/TILT POSITION-2
<CONTENTS> PAN/TILT 10m
Horizontal Line
Video Monitor
White
Paper
Center Line
– 2-17 –
