36
Zoom ratio
;
;
;
;
;
;
Bright object
Smear
When the camera is aimed at a bright light, such
as a spotlight, or a surface that reflects bright
light, smear or blooming may appear. Therefore,
the camera should be operated carefully in the
vicinity of extremely bright objects to avoid
smear or blooming.
SPECIFICATIONS
PREVENTION OF BLOOMING AND SMEAR
Power source
3.65 mm (H) x 2.71 mm (V), 1/4”
752 (H) x 582 (V)
Dimensions
Focus speed
Effective pixels
15.625 kHz
Focal length
BLC
220 V to 240 V AC, 50 Hz
120 (D) x 196 (H) mm
(4-3/4” (D) x 7-3/4” (H))
approx. 1.5 k
g
(3.3 lbs)
−
10 °C to +50 °C (14 °F to 122 °F)
12 W
24 V AC, 50 Hz
10 W
Power consumption
Ambient operating
temperature
Weight
selectable ON/OFF (SETUP MENU)
x10
internal/line-lock / multiplexed vertical drive (VD2)
50.00 Hz
1.0 V[p-p] PAL composite/75
Ω
more than 480 lines at centre
more than 400 lines at centre
50 dB (AGC OFF, weight on)
2.0 lx (0.2 foot-candle) (AGC ON HIGH)
approx. 3.8 s (TELE/WIDE) in manual mode
approx. 3.0 s (FAR/NEAR) in manual mode
automatic (open/close is possible)/manual
1 : 1.4 (WIDE) to 2.0 (TELE)
4.2 to 42 mm
4.9 ° to 48°
3.7 ° to 36 °
1/50 (OFF), 1/120, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s
Scanning area
Synchronization
Horizontal scanning fre-
quency
Vertical scanning fre-
quency
Video output
Horizontal resolution
Vertical resolution
Signal-to-noise ratio
Minimum illumination
Zoom speed
Iris
Maximum aperture ratio
Angular field
of view
H
V
Electronic shutter
ON (LOW)/ON (MID)/ON (HIGH)/OFF
AGC
WV-CS320
WV-CS324E
