33
Marking
1. Mark the mounting holes on the ceiling,
using the removed camera mounting base
as a template.
2. Fix the camera mounting base to the ceiling
with four screws (not provided, M4).
Be sure to match the wire with the fall
prevention wire fixing angle as shown below.
Fall prevention
wire fixing angle
Ring of the
fall prevention
wire
3. Hook the fall prevention wire on the camera
mounting base.
15
°
Cautions:
• Use the supplied dust protection sheet if the
camera mounting base is liable to be
exposed to a dusty atmosphere. Remove the
cover from the dust protection sheet, then
stick the sheet on the camera mounting
base.
• Remove the sheet before mounting the cam-
era on the base.
• While the camera is separated from the
base, keep the camera in the supplied poly-
ethylene sack.
4. Mount the camera on the camera mounting
base and rotate the camera clockwise.
