3
Read this first!
WARNING:
• To prevent fire or electric shock hazard, do not expose this
apparatus to rain or moisture.
• The installation shall be carried out in accordance with all applicable
installation rules.
• This product has no power switch. When turning off the power, turn
off a Power Supply or remove a power cable.
• Stop operation immediately in case of abnormal operation.
If the product emits smoke, smells of smoke, or shows signs of
external deformation, continued use may lead to fire or other failure,
resulting in injury or damage to the product.
Turn the power off immediately and contact qualified service
personnel for service.
CAUTION:
• This product has no power switch. Be sure to install disconnect
devices such as a circuit breaker to shut down the main power of
power supplying equipment to this product.
• In order to maintain adequate ventilation, do not install or place this
unit in a book case, built-in cabinet or any other confined space.
To prevent risk of electric shock or fire hazard due to overheating,
ensure that curtains and any other materials do not obstruct the
ventilation.
Provide at least the space indicated by the width of the brackets on
each side of the ventilation vents when installing the recorder.
Do not install the recorder so that the ventilation vents are located
downwards.
• To reduce the risk of fire or electric shock and annoying interference,
use the recommended accessories only.
• To reduce the risk of fire, the red (BATT) and white (SIGNAL) wires of
the power cable must be connected via fuses (10 A).
• Before attempting to connect or operate this product, please read
the label on the bottom.
• Before attempting to connect or operate this product, please read
these instructions carefully.
• The DC power supply connected to this recorder must be in the
same building.
• This recorder is only intended for a connection to an ethernet or PoE
network without routing to the outside plant.
indicates safety information.
