manualshive.com logo in svg

Panasonic WJ-VPU4000, Operating Instructions Manual

Share
Download
Panasonic WJ-VPU4000 Operating Instructions Manual Download Page 22

22

Control Reference Guide 

(continued)

Rear panel (1)

①

WLAN [1A, 1B] connector

②

WLAN [2A, 2B] connector

③

Bluetooth [BT] connector

④

GPS ANT. connector

Connect the 6 coaxial cables from the 
external antenna SH-IN2568 (locally 
procured) to the corresponding 
connectors.
The coaxial cables are labeled 
with "WIFI1", "WIFI2", "WIFI3", 
"WIFI4", "WIFI5", and "GPS / GNSS" 
respectively. Attach them to each 
connector as follows.
Connect WIFI1 to WLAN [1A]
Connect WIFI2 to WLAN [1B]
Connect WIFI3 to WLAN [2A]
Connect WIFI4 to WLAN [2B]
Connect WIFI5 to Bluetooth [BT]
Connect GPS / GNSS to GPS.ANT

Important:

 

•

Antenna other than SH-IN2568 is 
not available.

Note:

 

•

The external antenna SH-IN2568 
contains built-in antennas of 
WLAN×2, BT and GPS.

 

•

During GPS reception, the 
signals received will regularly and 
automatically set the recorder 
clock to GPS time, and provide 
speed information, if the recorder is 
attached to a vehicle.

⑤ 

CAMERA [OTHERS 1, 2, 3, 4] 
connector

Connect the Network Camera (sold 
separately) using shielded LAN 
cables.
OTHER1 : For Back Seat Camera
OTHER2 : For Side Camera (Left)
OTHER3 : For Side Camera (Rear)
OTHER4 : For Side Camera (Right)

⑥

CAMERA [FRONT] connector

Connect the Network Camera (sold 
separately) using shielded LAN 
cables.

⑦

PC, LAN connectors

Connect the recorder to PCs using 
shielded LAN cables.

Note:

For details on how to connect a PC, 
contact your supplier.

⋈

⋉

⋋

⋊

⋍

⋌

⋇

Summary of Contents for WJ-VPU4000





































Reviews:

No comments

Brands by name

Popular brands

Load more brands