background image

19

Notes on Handling

 

n

Usage

 

Do not set liquid containers or small 
metal objects on the recorder or 
SSDs.

 

Do not insert foreign objects into the 
openings of any devices.

 

Do not attempt to modify the 
recorder or SSDs.

 

Do not use the recorder in a place 
where it or an SSD might get wet, or 
water might get inside them.

 

The recorder is intended to work 
only with SSDs. Do not attempt 
to use non-SSDs, as that could 
damage the recorder.

 

When inserting an SSD, make 
certain that it is not upside down or 
backwards, and do not attempt to 
force a bent or damaged SSD, as 
that could damage the card or SSD 
slot.

 

While the recorder is recording 
or settings are being changed, 
do not disconnect the recorder’s 
power cable (included in the 
separately sold Cable Kit). Before 
disconnecting the power cable, 
first stop all operations and turn 
the recorder off. Otherwise, the 
SSD may be damaged, or recorder 
setting files or management data on 
the SSD may be corrupted. 
If the video and audio was recorded 
while being played back, several 
seconds of video and audio before 
the moment the power cable was 
disconnected will be lost.

Precautions for use of SSDs

 

SSDs are formatted using the 
Front-End Application. SSDs 
formatted by any means other than 
the Front-End Application cannot 
be used with this recorder. 
(Refer to the Operating Instructions 
for Front-End Application)

 

n

Maintenance

 

To clean the recorder, turn the 
vehicle’s ignition switch to the 
LOCK (OFF) position, and keep the 
recorder power turned off (see “Off” 
on page 30).

 

Do not use solvents such as 
benzene, thinner or alcohol, as 
these can deform the case or 
damage the surface finish.

 

Use a soft, dry cloth to dust off the 
recorder.

 

If using a chemically treated cloth, 
follow the instructions provided with 
it.

Summary of Contents for WJ-VPU4000





































Reviews: