96
Specifications
■
Matrix Switcher WJ-SX650 Series
Power Source:
220 V to 240 V AC, 50 Hz
Power Consumption:
60 W
Ambient Operating Temperature:
–10 °C to +50 °C {14 °F to 122 °F}*
1
Ambient Operating Humidity:
Less than 90 %
Video Input Board:
x 1
Camera Input (CAMERA IN 1 to 32):
1 V [P-P]/75
Ω
(BNC x 32), composite video signal
0.5 V [P-P]/75
Ω
data signal and 2.5 V [P-P]/75
Ω
vertical timing pulse multi-
plexed
Video Output (VIDEO OUT 1 to 4):
1 V [P-P]/75
Ω
(25-pin D-sub connector x 4)*
2
, active loop-thru output
Alarm Input (ALARM IN):
N.O. (Normally Open contact) or N.C. (Normally Close contact) selectable x 32
(37-pin D-sub connector)
RS-485 (Camera) Port:
6-conductor modular jack x 4 (2-wire or 4-wire communication, with termination
switches (MODE 1 to 4))
Extension Port (EXTENSION IN 2, 3):
37-pin D-sub connector x 2
Video Output Board:
x 1
Monitor Output (MONITOR OUT 1 to 16): 1 V [P-P]/75
Ω
(BNC x 16)
Data Port (DATA 1 to 4)
DATA 1:
Terminal Mode (TMNL) (PS·Data Mode (PS·DATA) selectable*
3
)
DATA 2:
Terminal Mode (TMNL)
DATA 3, 4:
Terminal Mode (TMNL)/Digital disk recorder (HDR) selectable
6-conductor modular jack x 4 (With termination switches (MODE 1 to 4))
Alarm Output (ALARM OUT 1, 2)
Alarm Output:
Open collector output x 32, Max. 24 V DC, 100 mA
Alarm Recover Output:
Non-voltage make contact input x 16
Time Adjust Input*
3
:
Non-voltage make contact input x 1
Time Adjust Output*
3
:
Open collector output x 1, Max. 24 V DC, 100 mA
Extension Port (EXTENSION 1 IN, OUT)*
3
: 6-conductor modular jack x 2 (With a termination switch (TERM: ON, OFF))
VS Input*
3
:
1 V [P-P]/75
Ω
(VS IN)
VS Output*
3
:
(VS OUT (THRU)): VS loop-thru output
(VS OUT): 1 V [P-P]/75
Ω
(VS)
Serial Port*
3
:
9-pin D-sub connector x 2
Expansion slot:
x 1
RS-485 (Camera) Port*
4
:
6-conductor modular jack x 4 (2-wire or 4-wire communication, with termination
switches (MODE 1 to 4))
Functions:
Monitor control (Camera selection, tour sequence, group sequence, group pre-
set, OSD display)
Camera/Receiver control (Coaxial/RS-485 communication)
Recorder control
Alarm control (Alarm event, Alarm ACK, Alarm reset, Alarm suspension, Alarm
History Display)
Timer event, Camera event
Dimensions:
420 mm (W) X 265 mm (H) X 372 mm (D)
{16-9/16" (W) X 10-2/5" (H) X 14-3/5" (D)} (excluding rubber feet and projections)
Weight:
19.0 k
g
{42 lbs.}
*
1
In the constant operation
*
2
When this unit is powered off, this signal will not be output even with the acceptation of video input signal.
*
3
Not available when the MODE switches are set as Video Output Board 2
*
4
Available only when Video Input Board WJ-PB65C32 is mounted
