Panasonic WJ-SX650/G Operating Instructions Manual Download

Page: 83 / 100

Playback

[PLAY/PAUSE]

[PLAY]

<During playback>
• Pause playback

[PLAY/PAUSE]

[PAUSE]

WV-CU950/650, WV-
CU360C/CJ:

When a camera is selected,
the recorded image of cam-
era is played back.

WV-CU950/650, WV-
CU360C/CJ:

During playback, the record-
ed images of cameras are
interchangeably displayed
by:
• Camera selection
• Selects the next/previous

camera.

When using WJ-RT416 Series,
the live images of the
recorder is displayed.

• Fast-forward

Shuttle ring clockwise

• [FF]
• Joystick

• Fast-reverse

Shuttle ring counterclockwise

• [REW]
• Joystick

• Skips to the next frame.

JogDial clockwise (During
pause)

Joystick

(During pause)

• Skips to the previous frame.

JogDial counterclockwise
(During pause)

Joystick

(During pause)

• Skips to the next record.

JogDial clockwise (During
playback)

Joystick

(During playback)

• Skips to the previous

record.

JogDial counterclockwise
(During playback)

Joystick

(During playback)

• Play the latest recorded

image.

(Not available for WJ-RT416
Series)

[GO TO LAST]

Not available

• Stops playback.

• Marking
(Not available for WJ-RT416
Series)

[STOP]

[MARK]

[STOP]

Not available

WV-CU950/650:

• When a camera is selected,

the latest recorded image of
camera is played back.

• For WJ-HD300 Series, this

operation is available only
during playback.

• Text information display ON
(Not available for WJ-RT416
Series)

[F3]

Not Available

• Displays the DATA COPY

window.

[F4]

Not Available

WV-CU950/650:

Refer to p. 74 Operation list of
WV-CU950/650 and WV-
CU360C/CJ for how to oper-
ate the DATA COPY window.

<During search list display>
• List/Thumbnail Switching
(Not available for WJ-RT416
Series)

[F1]

WV-CU950/650, WV-
CU360C/CJ:

Every pressing this button
can change the search list
between the list window and
thumbnail window.

Function

WV-CU950/650

WV-CU360C/CJ

Note

Summary of Contents for WJ-SX650/G





































































































Search results

Summary of Contents for WJ-SX650/G

Reviews:

Related manuals for WJ-SX650/G

Brands by name

Popular brands

Panasonic WJ-SX650/G, Operating Instructions Manual

Search results

Summary of Contents for WJ-SX650/G

Reviews:

Related manuals for WJ-SX650/G

Brands by name

Popular brands