manualshive.com logo in svg

Panasonic WJ-GXD400, Setup Instructions, Page: 47 / 54

Share
Download
Panasonic WJ-GXD400 Setup Instructions Download Page 47

47

Item

Display Mode

There are 2 display modes, "Full screen" mode (full-resolution display) and the "Trimmed screen" mode (trimming
mode).
Normally, select "Full screen". When the displayed images do not fit in the screen even by adjusting the display set-
tings of the monitor in use, select "Trimmed screen". In the "Trimmed screen" mode, however, images to be dis-
played in each screen will also be trimmed.

Notes:

• When displaying smaller images on a larger screen area e.g. displaying VGA images on a 4VGA screen area,

the images are enlarged to fit to the screen size.

• It is not possible to display larger images on a smaller screen area i.e. displaying 4VGA images on a VGA screen

area.

Sequence

Camera images are automatically switched and displayed in a specified order. 
There are two types of sequences: tour sequence and group sequence. 

Tour sequence

A live image on a split screen (individual small screen) can be automatically switched and displayed in a specified
order during displaying on a multi-screen (1-screen/3-screen/6-screen). 
The scheduled timer can switch a sequence. 

The following items can be specified in a sequence pattern. 

Tour sequence number

Camera no.

Preset camera no.(1-256)

Dwell time

Description

Displays the number to identify the tour sequence to be specified.

Displays the camera number to be connected to this unit.

Enter the preset position (1 to 256) of the camera to be moved at
step change. 

Select an interval time to go to the next sequential step.
However, an interval time between each step shall be the same.

Summary of Contents for WJ-GXD400























































Reviews:

No comments