manualshive.com logo in svg

Panasonic WJ-GXD400, Setup Instructions, Page: 45 / 54

Share
Download
Panasonic WJ-GXD400 Setup Instructions Download Page 45

45

Viewing

Live Image Reception

Live images are received from the camera or encoder.  
If a camera manufactured by other than Panasonic is used, live images will be received via the network disk
recorder. 
The following transmission methods (protocols) are supported depending on media types. 
MPEG-4 Media transmission: RTP multicast/unicast
JPEG Media transmission: HTTP-Push

Note:

• When displaying images on a 6-screen, the maximum image capture size of each screen is VGA size. When the

setting is configured in order to display images larger than VGA for each area of 6-screen, images may not be
displayed properly.

• When displaying images on a 3-screen, images larger than VGA can be displayed in the primary screen. When

the setting is configured in order to display images larger than VGA not for the primary screen or configured to
display images on 2 or more screens, images may not be displayed properly.

Live Audio Reception

A live audio stream is received from the camera, encoder or recorder. 
The live audio reception can handle 1 audio stream. Two or more audio streams cannot be handled. 
The live audio reception is compliant with G. 726. 

Note:

• The live audio reception dose not support the cameras manufactured by other than Panasonic.  When the live

audio reception is performed, use Panasonic cameras. 

Important:

• The audio output is provided only at the default screen. 
• The audio output is not provided when the schedule is displayed. 
• The audio output is not provided when the compression method is set to JPEG.

Change of Image and Screen Pattern

Refer to Schedule (page 24) for change of the image and screen pattern. 

Summary of Contents for WJ-GXD400























































Reviews:

No comments