14
Setup Window
Setup Window Call-up/Termination
This unit can be operated using a web browser installed on the PC.
1
Boot the PC.
2
Start the web browser.
3
Enter the IP address or URL assigned to this unit
into the [Address] box, and then press the
[Enter] key.
The authentication window will be displayed.
Even if "User authentication" is set to "Off", the
authentication window will be displayed.
Administration authentication is required to display
the setup window.
Important:
• Refer to a system administrator for the set IP
address of this unit.
• If "Host authentication" is set to "On" (page 39), this
unit cannot be accessed from the PC whose IP
address has not been registered with this unit.
Refer to a system administrator for further informa-
tion.
• Do not attach "0" before the numbers when entering
IP address.
Example:
b
192.168.0.50
×
192.168.0.050
4
Enter the user name and password registered on
this unit. Click the [Login] button.
The top page will be displayed.
Important:
• Refer to a system administrator for the set user
name and password.
• Refer to page 37 for the descriptions of how to regis-
ter users.
• The default user name and password are as follows.
User name: admin
Password: 12345
• To enhance the security, change the password for
an administrator before running the unit. It is recom-
mended to change the password for the administra-
tor periodically. Refer to page 37 for descriptions of
how to change the password.
• When the unit is being operated without changing
the user name and password, the pop-up window
saying that it is recommended to change the pass-
word will be displayed.