34
Network
Basic Settings
The network configuration for this unit is performed.
1
Click the [Network] button on the setup menu.
2
Click the [Basic] tab.
The "IPv4 network" window will be displayed.
3
Perform the settings for each item.
Refer to the following for further information about
the settings for each item.
4
Click the [Set] button.
Setup items
■
IPv4 network - Network port
[DHCP]
Select "On" or "Off" to determine whether or not to use
the DHCP function.
Default:
Off
[IPv4 address]
Enter an IP address when "Off" is selected for "DHCP".
Default:
192.168.0.250
[Subnet mask]
Enter a subnet mask according to the network configu-
ration when "Off" is selected for "DHCP".
Default:
255.255.255.0
[Default gateway]
Enter the IP address of the gateway according to the
network environment when "Off" is selected for "DHCP".
Default:
192.168.0.1
■
Maintenance port
[IPv4 address]
Enter an IP address.
Default:
192.168.2.250
[Subnet mask]
Enter a subnet mask.
Default:
255.255.255.0
[DNS]
Select "Manual" or "Auto" to enable IP address search-
ing by the host name using the DNS.
Selecting "Auto" is available only when "On" is selected
for "DHCP" (using the DHCP server).
When "Manual" is selected for the DNS, enter the DNS
server addresses in "Primary server address" and
"Secondary server address".
[Primary server address]
Enter the IP address of the primary DNS server.
[Secondary server address]
Enter the IP address of the secondary DNS server.