Panasonic WJ-GXD400 Setup Instructions Download Page 3 | Manualshive

Page: 3 / 54

Panasonic WJ-GXD400 Setup Instructions Download Page 3

3

Preface

This unit (WJ-GXD400) is an IP-network-ready decoder.
This unit receives video and audio data through the IP network and provides the data to external devices such as
monitors and speakers.
Images from up to 6 cameras can be simultaneously displayed with this unit. For major functions, refer to the
Installation Guide.
Refer to "Readme.txt" on the provided CD-ROM for supported devices.

About the User Manuals

There are 2 sets of operating instructions for the WJ-GXD400 as follows.

• Installation Guide: Explains how to install and connect devices.
• Setup Instructions (PDF): Explains how to perform the settings of this unit using a PC via a network.

Adobe

®

Reader

®

is required to read these operating instructions (PDF) on the provided CD-ROM.

When the Adobe

®

Reader

®

is not installed on the PC, download the latest Adobe

®

Reader

®

from the Adobe web site

and install it.

"GXD400" shown in the illustrations used in these operating instructions indicate this unit or the WJ-GXD400.
Refer to "Readme.txt" on the provided CD-ROM for further information including the dedicated software, its version,
and compatible cameras.

System Requirements for a PC

It is recommended to perform the settings of this unit using a PC that meets the following system requirements.

OS:

Microsoft

®

Windows Vista

®

32-bit

Microsoft

®

Windows

®

XP Professional SP2*

Microsoft

®

Windows

®

XP Home Edition SP2*

CPU:

Pentium

®

4 3.0 GHz or faster

Memory:

1 GB or more (A minimum of 512 MB memory is required when using Microsoft

®

Windows

®

XP.)

Monitor:

Resolution: 1 024 x 768 pixels or more
Color: 24-bit True color or better

Network interface:

A 100/1 000 Mbps network interface card must be installed.

Web browser:

Windows

®

Internet Explorer

®

7.0

Microsoft

®

Internet Explorer

®

6.0 SP2*

Other:

It is necessary to read the operating instructions and use the software on the provided CD-
ROM.
Adobe

®

Reader

®

: It is necessary to read the operating instructions on the provided CD-ROM.

* Microsoft

®

Internet Explorer

®

6.0 SP2 is required when using Microsoft

®

Windows

®

XP Home Edition SP2 or

Microsoft

®

Windows

®

XP Professional SP2.

«
1
2
3
4
5
...
»

Summary of Contents for WJ-GXD400























































Reviews:

No comments