manualshive.com logo in svg

Panasonic Windea VGDT18143W, Simple Manual

Share
Download
Panasonic Windea VGDT18143W Simple Manual Download Page 107

Lobby Phones

1. 

Part Names and Functions

The figures in the manual illustrate a lobby phone with camera.

●

 

The following models differ only in the size of the LCD panel.

● 

The figure illustrates a lobby phone with camera.

■ 

Lobby phone with camera 

■ 

Small lobby phone with camera 

■ 

Large lobby phone with camera

Detects the visitor movement 
and starts the LCD screen.

Sensor (heat sensor)

Speaker

208

209

Record Management

Playing Emergency Announcements

Items without recorded data do not appear.

The screen will automatically turn off when no operation 

is performed for 30 seconds.

●

 

Audio plays from the base unit.

Only one recording can be stored.

1

2

3

Select                      on the Notice 
(Records Management) screen

The recorded emergency announcement 
is played

Playing General Announcements

Items without recorded data do not appear.

The screen will automatically turn off when no operation 

is performed for 30 seconds.

Only one recording can be stored.

2

1

3

Select                      on the Notice 
(Records Management) screen

The recorded general announcement 
is played

Press the OFF button to stop playback

●

 

Audio plays from the base unit.

●

 

Touch           to delete the recorded general 

announcement.

●

 

Touch           to delete the recorded 

emergency broadcast. 

Press the OFF button to stop playback

●

 

It will return to the waiting state (nothing 

is displayed on the screen).

●

 

It will return to the waiting state (nothing

is displayed on the screen).

Delete

(   Page 203)

(    Page 203)

(For base unit)

Note

Note

Note

Note

Note

Note

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO

YOUR PREFERENCES

OPERATIONS AND MEASURES

WHEN ALARM GOES OFF

SECURITY ALARM SETTING

AND DISARMING

RECORD

MANAGEMENT

OTHER

Touch

Press

OFF

終了

Press

OFF

終了

Touch

Delete

2

呼 出

5

8

0

3

消

6

9

1

4

7

2

呼 出

5

8

0

3

消

6

9

1

4

7

2

呼 出

5

8

0

1

4

7

電源

電源

電源

3

消

6

9

電源

2

呼 出

5

8

0

3

消

6

9

1

4

7

POWER indicator

Lights up in green to indicate 
that the power is turned on.

Enables use of the maison key to 
unlock the entrance. Contactless 
key readers (ID verification 
devices) can also be installed.

Maison key cylinder or reader (optional)

Microphone

Used to call condominium units 
and unlock the main entrance.

Numeric buttons

Records video of visitors and 
displays this video on the base 
unit in a condominium unit.

Monitoring camera

Displays various information such 
as video of visitors, occurrence of 
fire, and gas leaks. It is also used 
to configure and operate the 
system.

LCD monitor

Used to clear incorrectly entered 
condominium unit numbers.

button (clear button)

Used to call condominium units 
and unlock the main entrance.

button

This number is found internally at 
the top of the device when the 
panel is removed.

Item number (internal)

Used to call the building 
manager room and configure 
settings.

button

Summary of Contents for Windea VGDT18143W























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands