Panasonic WH-SHF09D3E5, Service Manual

Page: 64 / 114

64
16.3 Breakdown Self Diagnosis Function
16.3.1 Self Diagnosis Function (Three Digits Alphanumeric Code)
š
When abnormality occur during operation, the system will stop operation, and OFF/ON control panel LED will
blink and error code will display on the control panel timer display LCD.
š
Even error code is reset by turning OFF power supply or by pressing ERROR RESET button, if the system
abnormality is still un-repaired, system will again stop operation, and OFF/ON control panel LED will again blink.
š
The error code will store in IC memory.
š
To check the error code
1 When an abnormality occurs, system will stop operation and OFF/ON control panel LED will blink.
2 Error code of the abnormality will display on the control panel timer display LCD.
3 To determine the abnormality description, the error code table needs to be referred.
š
To display past/last error code
1 Turn ON power supply.
2 Press and hold the CHECK button for more than 5 seconds to enter status mode.
3 Press the SEARCH DOWN/UP button to retrieve past/last error code.
4 Press the CANCEL button or wait 30 seconds to exit status mode.
š
To permanently delete error code from IC memory
1 Turn ON power supply.
2 Press and hold the ERROR RESET button for more than 8 seconds till a beep sound is heard.