12
Introduction and Installation
Installing the monitor station
Note:
L
When connecting to a PBX, make sure the
{
PBX MODE
}
switch is set to
{
ON
}
before
installing the monitor station (page 20).
1
Install the mounting bracket to a wall using the wood screws (4 mm x 16 mm,
3
/
16
" x
5
/
8
").
L
Remove the mounting bracket from the rear of the monitor station beforehand.
L
Before drilling, see page 10 for installation location.
2
Attach the power cable to the terminal. See page 18 for details on how to attach the power
cable.
L
If you want to use your own power cable, see page 11 for the type and distance.
Wall
Mounting bracket
83.5 mm
(3
5
/
16
")
Wood screws
Terminal (Non polar)
Power cable
GM201A.book Page 12 Monday, April 4, 2005 5:10 PM