24
Using the Unit
{
PUSH
}
mode (Push to talk mode)
1
When a call is received from the door station, press
{
TALK
}
.
2
Speak to the visitor.
3
To end the conversation, press
{
TALK
}
.
L
The display will turn off.
{
AUTO
}
mode (Auto talk mode)
This mode allows you to answer the call by voice. Speak a brief reply into (or toward) the
monitor station, such as
“Yes?”
or
“Hello?”
. This reply is used to start
{
AUTO
}
mode; the
visitor will not hear your reply. The monitor station will beep to indicate
{
AUTO
}
mode has
started and you may then speak to the visitor.
1
When a call is received from the door station, answer
“Yes?”
within 30 seconds.
L
A beep will sound to indicate that you can talk to the visitor (hands-free conversation).
2
Speak to the visitor.
3
To end the conversation, press
{
TALK
}
.
Note:
L
Make sure you are within about 50 cm (20 inches) of the monitor station.
L
You can also answer the call by pressing
{
TALK
}
.
L
Your initial reply should be brief (less than 1 second), otherwise
{
AUTO
}
mode will not start.
L
If a visitor calls you, a loud, brief sound (such as a barking dog) may start
{
AUTO
}
mode
even though you have not replied by voice.
{
HOLD
}
mode (Hold to talk mode)
1
When a call is received from the door station, press and hold
{
TALK
}
to speak to the caller.
L
A beep will sound and the Talk indicator will light.
2
To listen to the visitor, release
{
TALK
}
.
L
The Talk indicator will turn off.
3
To speak again, press and hold
{
TALK
}
.
4
To end the conversation, tap
{
TALK
}
.
Note:
L
Make sure you speak to the caller only while pressing
{
TALK
}
and release
{
TALK
}
when
you have stopped speaking so that the caller can speak to you.
GM201A.book Page 24 Monday, April 4, 2005 5:10 PM