Replacing batteries
When the batteries of the Wireless Camera run out of power (
), replace them with new batteries.
R
ONLY USE LR6 Alkaline batteries.
R
Batteries have a shelf-life. Check the shelf-life listed on the batteries before using them.
R
Make sure to close the door and turn off the power of the Wireless Camera before replacing the
batteries to prevent the Wireless Camera from falling down.
1
Move the slide lever (
A
) to the right and remove the battery case (
B
) from the wireless unit.
R
Be careful not to drop the battery case.
A
B
2
Insert the batteries into the battery case.
R
4 LR6 Alkaline batteries
R
Do not mix new and used batteries, or different types of batteries.
R
Make sure that the polarity ( , ) of the batteries is correct.
3
Insert the battery case into the wireless unit.
R
Firmly push the battery case upward until it locks in place.
C
D
4
Slide the power switch (
C
) to ON.
R
You can check if the power is actually on by confirming that the pair indicator (
D
) changes from
flashing to not lit.
16
Useful Information
Summary of Contents for VL-CM850BX
