Panasonic VL-CM850BX, Operating Instructions Manual

Page: 12 / 32

Displayed when the battery life of the Wireless Camera is low.
Signal/battery status
To view the signal and remaining battery power of the Wireless Camera:
1
Press M MENU N , then select “
SIGNAL/BATT
” by pressing MFN or MEN .
2
Press M N (Monitor button) ( “
OK
” ).
3
Press MEN (renew) to display the latest signal status and remaining battery power information.
4
To finish the operation, press M MENU N 2 times.
Note:
R The M MENU N button will light in red to inform you when the signal is weak or if the remaining battery
power is running low. If the M MENU N button is pressed at this time, the light goes out and the signal/
battery status screen is displayed. Take the appropriate action, such as exchanging the batteries, after
checking the information displayed.
Signal status symbols
Strong Weak Out of range
*1
*1
*1 Use within this range.
Note:
R When the Wireless Camera is out of range, move the Monitor to an area with a stronger signal.
Remaining battery power symbols
Full Low Out of power
*1 *1
*1 Use within this range.
Note:
R When the batteries of the Wireless Camera run out of power, replace them with new batteries
(page 16).
R When the Wireless Camera is (Out of range), the remaining battery power symbol of the Wireless
Camera is not displayed on the Monitor.
12
Getting Started