Panasonic VL-CM850BX, Operating Instructions Manual

Page: 13 / 32

Monitoring the outside
You can monitor the outside images taken by the Wireless Camera.
You can perform the following operations during monitoring:
R Switching between Wide/Zoom (page 13)
R Adjusting brightness (display) (page 13)
MENU
1
Press M N (Monitor button).
R The outside image will be shown on the display.
2
To end operations, press M N (Monitor button).
Note:
R Monitoring lasts for about 20 seconds after M N (Monitor button) is pressed.
However, if operations are performed during monitoring, monitoring can be extended to a maximum of
3 minutes.
R At night or at other times when the area around the Wireless Camera becomes dark, the following
occur:
– The image quality is reduced.
– Images are automatically brightened to make it easier to see the face of the other party. Although
images may appear to be washed out, this is not a malfunction.
Adjusting brightness (display)
1
Press M MENU N while monitoring.
2
Press MFN or MEN to adjust the brightness.
Manipulating displayed images with Wide/Zoom and Pan/Tilt
During monitoring, the display can be temporarily switched between Wide/Zoom, and the Zoom position
can be changed with Pan/Tilt operations.
Wide display
(default setting)
Zoom display
13
How to use