Monitoring the outside
You can monitor the images from outside taken by the Wireless Camera.
You can perform the following operations during monitoring:
R
Switching between Wide/Zoom (page 19)
R
Adjusting brightness (display) (page 19)
MENU
1
Press
M
N
(Monitor button).
R
The outside image will be shown on the display.
2
To end operations, press
M
N
(Monitor button).
Note:
R
Monitoring lasts for about 20 seconds after
M
N
(Monitor button) is pressed.
However, if operations are performed during monitoring, monitoring can be extended to a maximum of
3 minutes.
R
At night or at other times when the area around the Wireless Camera becomes dark, the image quality
may be reduced.
Adjusting brightness (display)
1
Press
M
MENU
N
while monitoring.
2
Press
MFN
or
MEN
to adjust the brightness.
Manipulating displayed images with Wide/Zoom and Pan/Tilt
During monitoring, the display can be temporarily switched between Wide/Zoom, and the Zoom position
can be changed with pan/tilt operations.
Wide display
(default setting)
Zoom display
1
Press and hold
M
N
(Monitor button) for about 3 seconds when in the Wide display.
R
The display is switched to the Zoom display.
19
How to use
Summary of Contents for VL-CM850A
