R
Use Alkaline AA (LR6) batteries. The batteries’ lifetime will be reduced if different types of batteries are
used together.
R
To prevent the Wireless Camera from falling down when replacing the batteries, make sure to close
the door and turn off the power of the Wireless Camera before replacing batteries.
Attaching the Wireless Camera to a door
Note:
R
Be careful not to get your fingers caught in the door when attaching the Wireless Camera.
1
Loosen the wireless unit’s fixing screw (
A
) with the included hex key (
B
), and then hang the
Wireless Camera from the door.
R
Do not take the fixing screw (
A
) off, just loosen it.
R
Position the Wireless Camera so that visitors can be centrally viewed when monitoring.
C
D
E
A
B
2
Holding the camera unit (
C
), adjust the position of the metal plate (
D
) so that the distance between
the wireless unit (
E
) and camera unit (
C
) matches the width of the door, then temporarily fix the
Wireless Camera into position by gently tightening the fixing screw (
A
).
3
Check that the metal plate (
D
) of the Wireless Camera does not hit against the door frame when
opening or closing the door.
4
Check that the Wireless Camera is in a suitable position.
R
Check images from the Wireless Camera on the Monitor, and adjust the position of the Wireless
Camera as necessary.
16
Getting Started
Summary of Contents for VL-CM850A
