Link Functions (Q-Link / VIERA
Link)
79
Q-Link
Preparations
•
Connect the DVD Recorder / VCR with the following logos :
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a
trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)” or “SMARTLINK
(a trademark of Sony Corporation)”
•
Q-Link connection
(p. 77)
•
Use fully wired SCART cable.
•
Set up the DVD Recorder / VCR. Read the manual of the recorder.
•
Q-Link terminal setup in the Setup Menu
[AV1 out] (p. 39)
•
Download Analogue channel setting
“Analogue channel download” (see below)
Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue is
still broadcast). Digital channel settings are not downloaded.
•
To download the Analogue channel settings
[Q-Link Download] (p. 39) or [Auto Setup] in Analogue mode (p. 46) or
“Auto Setup” - when first using the TV (p. 13)
Direct TV Recording
- What you see is What you record
Recording the current programme in a DVD Recorder / VCR immediately.
DIRECT TV REC
•
Available conditions :
Picture source
Mode
Recording from
Analogue
TV
TV monitor out
AV
Recorder’s tuner
DVB
TV
TV monitor out
AV (watching recorder’s tuner)
AV
Recorder’s tuner
AV (watching recorder’s external input)
AV
Recorder’s
external input
AV (watching TV’s external input)
AV
TV monitor out
•
When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
•
Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
•
Changing channel is not available while the recorder is recording from the
TV tuner.
■
To stop recording
Unlock the tuner
G
U
ID
E
Tuner Locked
Press EXIT to unlock and stop recording
EXIT
Power on link and Easy playback
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment
is activated, the TV is turned on and input mode is switched automatically so that you can view the
content. (Only when the TV is in Standby mode.)
Power off link
When the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the
videocassette or disc is not active.)
•
This function will work even if the TV enters Standby mode automatically by auto power standby
function.
Note
•
Some recorders are not applicable. Read the manual of the recorder.