On-screen messages
119
On-screen messages
Message
Meaning / Action
All tuning data will be erased
[Shipping Condition] will erase all tuning data.
(p. 67)
Are you sure ?
Confirm correct operation.
Are you sure you want to
delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial / dish is plugged in properly. It may be
necessary to have an aerial / dish installer check the signal and aerial / dish
alignment.
Reset channels.
(p. 56, 57)
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 66). You must enter the PIN
number before the channel will be displayed.
External Recording Due to
Start
This message will appear 2 minutes before timer programming event for
external recording due to start.
Faulty dish
The satellite cable might be short-circuited or there might be connection
problems of the cable. Check the cable and connection and then turn the TV
off with the Mains power On / Off switch, and turn it on again.
If the message still persists, consult a dish installer for checking the dish and
cable.
Feature not available.
It is not possible to record from AV2 (COMPONENT) or HDMI. Connect the
recorder to the TV using a fully wired SCART cable for recording from the TV
tuner.
Confirm Q-Link or VIERA Link settings.
(p. 97 - 100)
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the OK button to
view the demonstration to explain how to use it.
Found new software version
.
Press OK to start update (may
take over 40 mins) or press
EXIT to ignore and you can
update when TV is in standby
There is a new software available.
Invalid operation - Please
check settings and
connections.
Check the Q-Link or VIERA Link connection and setting.
(p. 97 - 100)
Invalid system time. Please
exit !
Cannot get the time information and cannot edit Timer Programming screen.
Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check time
display on Banner
Cannot get the time information. If there is no time displayed on the Information
banner, check the connection of the RF cable.
Max. number of timers already
set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update channel
list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the broadcasters.
This message can be deactivated by setting [New Channel Message] to [Off] in
[DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or local
signal availability.
Press OK to start Auto Setup.
Follow the on-screen instructions.
Please also refer to p. 116.
If channels are still not found, consult your local Panasonic dealer.
No module inserted
Check the CI module is inserted completely (p. 69).
No recording - Already
recording
The equipment may already be recording.
