Panasonic TX-L42DT50Y Operating Instruction Download

Page: 43 / 116

How to Use Menu Functions

Menu

Item

Adjustments / Configurations (alternatives)

Setup

Link Settings

Intelligent Auto
Standby

Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption

[Off] / [On (With reminder)] / [On (No reminder)]

(p. 93)

This function is available when [VIERA Link] is set to [On].

Download

Downloads channel, language and country / region settings to Q-Link or
VIERA Link compatible equipment connected to the TV

DVB-S and DVB-C channel settings cannot be downloaded.

Child Lock

Applies access control for channels or inputs to prevent unwanted access (p. 57)

uning Menu

Favourites Edit

Creates a list of favourite channels (p. 50)

Not valid on Analogue mode

Channel List

Skips the unwanted channels or edits channels (p. 51)

Auto Setup

Automatically searches for the receivable channels (p. 46 - 49)

Manual Tuning

Searches for the channels manually (p. 52)

Update Channel
List

Updates the channel list while keeping your settings (p. 53)

For DVB mode

Favourite Network

Selects your favourite network for each broadcasters (only available in some
countries)

For DVB-C or DVB-T mode

New Channel
Message

Selects whether to give a notification message when a new channel is found

[Off] / [On]

(p. 53)

For DVB mode

Service
Replacement

Set to [On] to enable a message to switch to the available service (only available
in some countries)

[Off] / [On]

For DVB-C mode

Signal Condition

Checks the signal condition (p. 53)

Not valid on Analogue mode

Antenna System

Sets the antenna system to use plural LNBs for receiving several satellites

[One LNB] / [MiniDiSEqC] / [DiSEqC 1.0] / [Single Cable]

(p. 46)

This TV supports DiSEqC Version 1.0.

For DVB-S mode

LNB Configuration

Selects the satellite for each LNB (p. 46)

For DVB-S mode

Attenuator

Automatically reduces the DVB-C signal to avoid the interference

[Off] / [On]

If the DVB-C signal is too strong, the interference may occur. In this case set to
[On] to reduce the signal automatically.

Add TV Signal

Adds the TV mode

This function is available if you skip any modes to tune in [Auto Setup] for first
using the TV.

To operate, refer to the “Auto Setup” operations for first using the TV (p. 15).

Summary of Contents for TX-L42DT50Y





















































































































Search results

Summary of Contents for TX-L42DT50Y

Reviews:

Related manuals for TX-L42DT50Y

Brands by name

Popular brands

Panasonic TX-L42DT50Y, Operating Instruction

Search results

Summary of Contents for TX-L42DT50Y

Reviews:

Related manuals for TX-L42DT50Y

Brands by name

Popular brands