How to Use Menu Functions
42
Menu
Item
Adjustments / Configurations (alternatives)
Network
Software Update
Checks for available software updates from the Panasonic website
New Software Message
Selects whether to give a notification message when new software is found via
network
[Off] / [On]
Network Status
Displays the network status (MAC Address, current network settings, etc.)
T
imer
Timer Programming
Sets a timer to record or remind forthcoming programmes (p. 54)
For DVB mode
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
(p. 22)
Auto Standby
Sets the duration of time that the TV will remain on when no operation is
performed
[Off] / [2] / [4] (hours)
Starting Timer Programming automatically does not affect this function.
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.
Setup
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[On]
[Intelligent Auto Standby]
[On (No reminder)]
[Auto Standby]
[2 hours]
[Front Logo LED]
[Off]
Recording Setup
Settings for the recording feature of the USB HDD (p. 65)
Link Settings
VIERA Link
Sets to use VIERA Link functions
[Off] / [On]
(p. 92)
HDMI Content Type
Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable
[Off] / [Auto]
This function is available if the connected equipment supports HDMI Content
Type.
The content type information will be displayed for several seconds when this
function works.
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]:
Image displayed on screen
Component and HDMI signals cannot be output.
Power on Link
Sets to use Power on Link function
[Off] / [On]
(p. 91, 92)
Power off Link
Sets to use Power off Link function
[Off] / [On]
(p. 91, 92)
Standby Power
Save
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On]
(p. 93)
This function is available when [VIERA Link] is set to [On] and [Power off Link]
is set to [On].
