English
- 5 -
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
• Put the TV onto a work table with the screen panel
down on the clean and soft cloth. Leave the stand(s)
protruding over the edge of the surface.
•
Unscrew the screws that fixing the stand(s).
• Remove the stand(s).
When using the
wall-hanging bracket
Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation;
Rear of the TV
a
b
55”
65”
a (mm)
200
400
b (mm)
200
200
View from the side
c
VESA
Bracket
d
(d)
55”
65”
Depth of screw (c)
min. 8 mm
15 mm
max. 12 mm
20 mm
Diameter
M6
M6
Note:
The screws for fixing the TV onto the wall-hanging
bracket are not supplied with the TV.
Assembling / Removing
the pedestal
Preparations
Take out the pedestal(s) and the TV from the packing
case and put the TV onto a work table with the screen
panel down on the clean and soft cloth (blanket, etc.)
•
Use a flat and firm table bigger than the TV.
• Do not hold the screen panel part.
• Make sure not to scratch or break the TV.
CAUTION:
Please refrain from inserting pictured screws to
the TV body when not using the TV stand e.g. wall hanging.
Inserting screws without pedestal may cause a damage of
the TV.
Assembling the pedestal
1.
The stand of the TV consists of two pieces. Install
these pieces together.
x4
M6 x 20 mm
2.
Place the stand(s) on the stand mounting
pattern(s) on the rear side of the TV.
3.
Insert the screws
(M4 x 12)
provided and tighten
them gently until the stand is properly fitted.
x4
M4 x 12 mm
M6 x 20 mm
