Panasonic TX-23LXD60 Operating Instructions Manual Download

Page: 3 / 56

Example 2

Example 1

This TV set is designed to operate on 220

240V, 50Hz A.C.

To prevent damage which might result in electric shock or fire,

do not expose this LCD television to rain or excessive

moisture.

This TV must not be exposed to dripping or splashing water

and objects filled with liquid, such as vases, must not be

placed on top of or above the TV.

WARNING : HIGH VOLTAGE !!!

Do not remove the rear cover as live parts are accessible

when it is removed. There are no user serviceable parts

inside.

Avoid exposing the TV set to direct sunlight and other

sources of heat e.g. lit candles.

Ensure that the mains plug is easily accessible.

Never push objects of any kind into this LCD TV

through cabinet slots as they may touch dangerous

voltage points or short out parts that could result in a

fire or electric shock.

To prevent injury, this apparatus must be securely attached

to the floor/wall in accordance with the installation

instructions (mounting bracket is not supplied).

The On/Off switch on this model does not fully disconnect

the TV from the mains supply. Remove the mains plug from

the wall socket when the TV set is not used for a prolonged

period of time.

CABINET AND LCD PANEL CARE

Remove the mains plug from the wall socket. The cabinet

and LCD panel can be cleaned with a soft cloth moistened

with mild detergent and water. Do not use solutions

containing benzol or petroleum.

Adequate ventilation is essential to prevent failure of
electrical components, we recommend that a gap of at
least 10 cm is left all around this LCD television even
when it is placed inside a cabinet or between shelves.

When ambient temperature is cool, the picture may take

a short time to reach normal brightness, but this is not a

malfunction. (After brief moment, the picture will have

normal brightness.)

Ventilation should not be impleded by covering the

ventilation openings with items such as newspapers,

tablecloths and curtains.

TV GAMES / HOME COMPUTERS

Extended use of TV games or home computers with any

television set can cause a permanent ‘shadow’ on the

screen. This type of irreversible LCD panel damage, can be

limited by observing the following points:

Reduce the brightness and contrast levels to a minimum

viewing level.

Do not operate the television set for a continuous period of

time while using TV games or home computers.

Do not allow a still picture to be displayed for an extended

period, as this can cause a permanent after---image to

remain on the LCD TV screen.

Examples of still pictures include logos, video games,

computer images, teletext and images displayed in 4:3

mode.

This type of LCD panel damage is not an operating defect,

and as such is not covered by the Panasonic warranty.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the
fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362.

Check for the ASTA mark

ASA

or the BSI mark

on the body of the fuse.

If the fitted plug has a removable fuse cover you must ensure that itis refitted when the fuse isreplaced. If you
lose the fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse
covers can be purchased through your local Panasonic dealer.

The plug fitted to this appliance incorporates a mains filter circuit. If this is removed or replaced with a

non

filtered plug this television will no longer meet the European standards for Electromagnetic

Compatibility (EMC). If the fitted plug is unsuitable for the socket outlet in your home an appropriate

adapter should be used.

Nonetheless, if the fitted plug is replaced, the fuse should be taken out and the cut

off plug disposed of

safely. There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below.If in any doubt please consult a
qualified electrician.

How to replace the fuse (for plug type shown in example 1)

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the

mains plug (see example 1).

How to replace the fuse (for plug type shown in example 2)

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse,
then press the fuse cover down securely (see example 2).

IMPORTANT

The wires in the mains lead of this appliance are coloured in accordance with the following code :

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals in your plug,
proceed as follows :

The BLUE wire must be connected to the terminal marked ‘N’ or coloured black.

The BROWN wire must be connected to the terminal marked ‘L’ or coloured red.

IMPORTANT NOTE

: Under no circumstances should either of these wires be connected to the Earth terminal of the three pin plug,

marked with the letter ‘E’ or the earth symbol.

WARNINGS AND PRECAUTIONS