Panasonic TX-23LXD60 Operating Instructions Manual Download

Page: 24 / 56

To lock a programme position to

prevent access

Choose the programme position

Move to the lock column

Choose between lock on or

lock off

To copy programme information

to a compatible VCR (DVD/R)

connected to AV1 or AV2

Move to the Prog. column

Press the Blue button on

the remote control Programme

data will now be sent to

the VCR (DVD/R). This might take

a few seconds, depending on the

number of stations stored.

Note:

If the message “Q---Link? Feature not

available”

check Q---Link (AV1 or AV2)

check your VCR (DVD/R)”

appears on the screen, the television is

unable to send the programme

information to the VCR (DVD/R). See

the VCR (DVD/R) handbook for further

information.

TUNING MENU

PROGRAMME EDIT

Programme edit

Prog.

Chan.

Name

Lock

Lock Off/On

Select option

Exit

Store

Return

CH41

XYZ

Off

DOWNLOAD IN PROGRESS

PLEASE WAIT
Programme : 48

Remote control unavailable

Summary of Contents for TX-23LXD60

























































Search results

Summary of Contents for TX-23LXD60

Reviews:

Related manuals for TX-23LXD60

Brands by name

Popular brands

Panasonic TX-23LXD60, Operating Instructions Manual

Search results

Summary of Contents for TX-23LXD60

Reviews:

Related manuals for TX-23LXD60

Brands by name

Popular brands