53
On Screen Messages
Actions / Meanings
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please follow the message.
If it still fails, consult your local Panasonic dealer.
Please check settings and connections on HDMI
devices.
Communication error with Control on HDMI function
(p. 46)
No stations found
Please insert the aerial No analogue signal can be
found in Auto setup.
Please wait.
A function is in progress.
Recording in progress
The recording equipment is recording the programme
signal from its own tuner. You can turn the TV off and
leave the equipment recording in the normal way.
Recording stopped --- TV source changed
Direct TV recording (analogue mode) will stop if chan-
nel or input source is changed.
Software successfully updated
Press EXIT to continue
The software updating is finished
Software Update failed. Please try again later.
Press EXIT to continue
Perform ”System Update Search Now” in
System Update (p. 38).
If it is still failed, there may not be any new software.
This service is locked!
Press OK to enter PIN
The selected channel is locked in Child Lock (p. 34).
Timer already expired !
Starting time in Timer Programming is already past. Set
correctly (p. 31).
Timer Event Due to Start
1: BBC1 has been
Programmed for recording at 20:00
This message will appear 2 minutes before timer pro-
gramming event due to start.
Timer incorrect !
Set Starting and Ending times in Timer Programming
correctly (p. 31).
Timer overlap!
The timer programme events are overlapped. Cannot
record other channel at the same time. Check the Start-
ing and Ending times in Timer Programming (p. 31).
Unable to download, Check Equipment
The tape or disc is active. Stop the equipment and try
again.
WARNING
All analogue tuning data will be erased
Auto setup will erase all present analogue tuning data
(p. 25).
WARNING
All digital tuning data will be erased
DVB Auto Setup will be erased all present DVB tuning
data (p. 35).
ON SCREEN MESSAGES
Summary of Contents for TX-23LXD60
Page 55: ...55 ...
