Panasonic TX-23LXD60 Operating Instructions Manual Download

Page: 33 / 56

The Profile Edit menu allows you to select your favourite programme positions

and display them as a list in the TV Guide or Information banner, to allow quick

and easy access to the programs you watch most often.

DVB mode

Press the

MENU

button.

Move to

Setup menu

Access

Setup menu.

Move to

DVB Setup Menu.

Access

DVB Setup Menu.

Move to

Profile Edit.

Access

Profile Edit.

Add a channel to the Profile list

Move to the programme position which you

wish to add to the profile list.

Press the

Red

button repeatedly to cycle

through the channel categories.

Press the

Green

button repeatedly to cycle

through the profiles.

Press the

Yellow

button to add a channel

to the profile list.

Press the

Blue

button to add all the channels

to the profile list.

Press the

button to store your Profile list.

Edit the Profile list

When the profile list is highlighted

Press the

Red

button to edit the profile name.

Press the

Green

button to move the channel.

Press the

Yellow

button to delete the channel.

Press the

Blue

button to delete the all channels.

Press the

MENU

button to return to the DVB

Setup Menu.

Press the

EXIT

button at any time to exit Profile Edit.

A list of favourites can be accessed by pressing
the

GUIDE

button or the

button.

See pages 12 and 13.

Profile Edit menu (DVB mode)

EXIT

Summary of Contents for TX-23LXD60

























































Search results

Summary of Contents for TX-23LXD60

Reviews:

Related manuals for TX-23LXD60

Brands by name

Popular brands

Panasonic TX-23LXD60, Operating Instructions Manual

Search results

Summary of Contents for TX-23LXD60

Reviews:

Related manuals for TX-23LXD60

Brands by name

Popular brands