Panasonic TX-23LXD60 Operating Instructions Manual Download

Page: 13 / 56

DVB mode

Information banner will appear when changing channel, or pressing the (Information) button. The banner gives the user

information about the channel and programme currently being viewed. The banner will time out and dissapear from the

screen after a set time period, this time period can be set in the DVB System Setup menu. See page 30.

Press the left or right cursor button while banner is displayed to switch between

Now

and

Next.

This switches between the information for the current Programme being shown

(Now)

and the next Programme to be shown

(Next)

Press the up or down cursor button to step through the banner information for all channels.

Press the OK button to view a channel. Now and Next can also be used in this mode.

While the banner appears
Press the

button to display an extended banner showing any information available on

the current selected programme.
Press the

button while in extended banner mode to return to normal banner view.

To clear the banner from the screen while in extended banner mode, press the

EXIT

button.

Analogue mode

Pressing the

(Information) button will display the analogue channel information for a

few seconds. This will then be timed out to display just the programme position number

near the top left corner of the screen.
To remove this programme position number, press the

(Information) button again.

DVB mode

Press the

STTL

button to switch Subtitles ON.

Subtitles will appear (if available) by the language you select in
Preferred Subtitles in DVB System Setup menu. See page 30.
Press again to switch Subtitles OFF.
Digital text is not available whilst subtitles are switched on.

TV Guide---Electronic Programme Guide (EPG) (DVB mode)

Viewing Category

Press the

Blue

button while in the banner to scroll through available categories.

For example

All Services :

All available Services

Free TV :

Free TV channels only

Pay TV:

Encrypted TV channels

Radio :

Radio channels only

Information:

Information given on individual programmes

Profile

Select one of four possible user defined profiles

Press the

EXIT

button to exit the banner at any time.

EXIT

Subtitles On / Off (DVB mode)

Summary of Contents for TX-23LXD60

























































Search results

Summary of Contents for TX-23LXD60

Reviews:

Related manuals for TX-23LXD60

Brands by name

Popular brands

Panasonic TX-23LXD60, Operating Instructions Manual

Search results

Summary of Contents for TX-23LXD60

Reviews:

Related manuals for TX-23LXD60

Brands by name

Popular brands