REFERENCE
40
Controls and Buttons
This part of the Reference sections discusses the controls and
buttons located on the receiver and the remote control.
Slide open the door to get to the Access Card.
Front Panel Controls
POWER
Turns the satellite receiver’s power on or put
the unit into standby mode.
RECALL
Brings up the on-screen channel marker.
TV/DSS
Switches the source of the video signal from
DSS
®
satellite signals to an off-air antenna or cable signal
(if you are using RF output from the satellite receiver).
ARROWS
Press the navigation arrows to move the
on-screen highlight up, down, left, or right. Using the
arrows to highlight a menu item is also called “pointing.”
MENU/SELECT
Brings up the Main Menu. If you are
already in the menu system (or a program guide), press
MENU/SELECT to select a highlighted choice.
ACCESS CARD
Identifies you to your program
providers. The DSS
®
system requires a valid access card.
MENU
SELECT
POWER
RECALL
TV/DSS
