CONNECTIONS
34
Connection C
Good Picture and Sound Quality
To use this connection you must have:
•
TV with RF input (jack)
•
VCR with RF and audio/video inputs
•
Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box.
1.
Connect coaxial cables and audio/video cables as shown.
To receive DSS
®
programming:
•
Tune TV to channel 3 or 4 (depending on how you set the
CH3/CH4 switch on the back of the receiver).
To receive off-air programming (no cable box):
1.
Turn off VCR and satellite receiver.
2.
Tune TV to desired channel.
To receive cable programming (with cable box):
1.
Turn off VCR and satellite receiver.
2.
Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3.
Tune cable box to desired channel.
To record DSS
®
programming:
1.
Tune TV to the channel on which you receive the DSS
®
signal.
2.
Tune satellite receiver to desired channel.
3.
Set VCR to record on line input.
To view VCR programming:
1.
Tune TV to VCR output channel (usually CH3 or CH4).
2.
Turn satellite receiver off.
VIDEO
DSS
RECEIVER
VCR
IN FROM ANT
OUT TO TV
CABLE
OR
OFF-AIR ANTENNA
L
R
SATELLITE IN
AUDIO
L
IN
R
L
R
VIDEO
AUDIO
AUDIO IN
VIDEO IN
SATELLITE
DISH
CH3
CH4
TV
OUT TO TV
IN FROM ANT
AUDIO OUT
VIDEO OUT
CH4
CH3
CAUTION
Do not stack electronic components
or other objects on top of the DSS
Receiver. The slots on top of the
receiver must be left uncovered to
allow proper airflow to the unit.
Blocking the airflow to the unit could
impair performance or damage your
receiver and other components.
Do not stack the DSS receiver on top
of a “hot component” such as an audio
power amplifier.
