background image

12

PROGRAM GUIDES

Allows you choose from a list of sorting topics.

Once you have selected a sorting topic from the list, your guide
will be simplified to show only that type of program.

After selecting a topic, a 

Themes 

button may appear in the place of

the 

Other 

button.

Resets the guide to show all available channels and listings.

 

Takes you to the guide filter screen.

Using the Themes Button

After you select one of the sorting buttons, the name of that button
changes into the 

Themes 

button. Use the 

Themes 

button to further

sort the Grid or Info Guide to show subtopics (“themes”). For
example, you could simplify the guide to show  “baseball” under
the Sports sorting button, or “comedies” under Movies.

Exiting A Program Guide

There are two ways to exit a Program Guide:

Point to a channel and press MENU/SELECT.

Press EXIT on the remote.

Program Guide disappears and you are returned to regular
program viewing. If you have selected a pay-per-view program,  a
display screen allows you to purchase the selected program.

Summary of Contents for TUIRD10 - DSS RECEIVER

































































Reviews: