![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-t8ewdtz2m/toughbook-cf-t8ewdtz2m_operating-instructions-manual_3737785012.webp)
12
Get
ting St
arted
First-time Operation
The battery charging starts automatically.
CAUTION
Do not disconnect the AC adaptor and do not switch the wireless switch to
on until the first-time operation procedure is completed.
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
Handling the AC adaptor
• Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the bat-
tery pack alone.
Slide and hold the power switch
for approximately one second until the
power indicator
lights.
CAUTION
Do not slide the power switch repeatedly.
The computer will forcibly be turned off if you slide and hold the power switch for
four seconds or longer.
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
Do not perform the following operation until the hard disk drive indicator
turns off.
• Connecting or disconnecting the AC adaptor
• Sliding the power switch
• Touching the keyboard, touch pad or touchscreen
• Closing the display
Do not change the Setup Utility until completing step
5
. If you do so, Windows
setup may not operate properly.
Follow the on-screen instructions.
The computer will restart after the setup is complete.
To go to the next step, wait until the hard disk drive indicator
has turned
off.
CAUTION
Do not turn off the computer until completing the first-time operation procedure.
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard, touch pad or touch-
screen, and wait until the screen changes.
When using the included stylus, avoid touching the screen with you hands, etc.
This can cause input errors.
<For MUI OS model>
The keyboard will operate as the US keyboard until the keyboard setting is
changed. Because of this, some alphabets shown on display may differ from
inputted ones.
To avoid the accidental selections, during setting up Windows,
• Use the touch pad to make some selections.
• Press the NumLock key and input in the Ten-key mode to input numbers.
To match the languages, change the language settings after setting up Windows
(
page 13). Do not change the settings in [To change system or these settings,
click Customize] of [Regional and Language Options] during setting up Win-
dows.
3
Connect your computer to a power outlet.
4
Turn on the computer.
5
Setup Windows.
3
4
CPE01942ZA_T8-OI_XP_M.book Page 12 Friday, November 21, 2008 10:31 AM
Summary of Contents for Toughbook CF-T8EWDTZ2M
Page 38: ...38 MEMO ...
Page 39: ...39 Operation Troubleshooting ...