background image

91

SD/SDHC Memory Card

The SD Memory Card slot on this computer only accepts SD/SDHC Memory Cards

*1

.

*1

 SD/SDHC/SDXC Memory Cards

To format the SD/SDHC Memory Card on this computer, do not use [Format] of Windows, but use the SD/SDHC Memory 
Card format software.

 

You can download the software from the web site below.

 

http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
To use the SD/SDHC Memory Card on other devices, format the card on the devices. For further information, refer to the 
instruction manual of the devices.

CAUTION

Do not remove or insert the SD/SDHC Memory Card until Windows has completed loading.
Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.
• While the computer is in 

 sleep / 

 standby or hibernation.

• While the SD Memory Card indicator 

 is on.

• While data is being read from or written to the card.
• Immediately after the writing operation. 

 

The computer may still continue the access to the card just after writing operation. If you remove the card before the 
operation is completed, the data may be damaged or the card access may no longer be performed normally.

Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages, 
directly or indirectly.

To insert the card

1

Insert the SD/SDHC Memory Card with the label side facing up and with the cut corner on top.

SD/SDHC Memory Card Information

Inserting/Removing the SD/SDHC Memory Card

Windows 7

Windows 7

Windows XP

Summary of Contents for Toughbook CF-F9KWH011M














































































































































































































Reviews: