manualshive.com logo in svg

Panasonic Toughbook CF-F9KWH011M, Reference Manual

The Panasonic Toughbook CF-F9KWH011M is a rugged laptop designed for durability and resilience in demanding environments. To get the most out of this powerful device, download the free Reference Manual from our website, providing you with essential user instructions and comprehensive information.

Share
Download
background image

185

Hardware Diagnostics

NOTE

Only for the hard disk, keyboard and touch pad, you can select standard diagnostic check or extended diagnostic 
check.

 

When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check.

We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using the

 

internal keyboard instead. Note, however, that the touch pad and internal keyboard may not function temporarily during

 

diagnostic check. If this happens, wait for a moment before operating them.

If the touch pad does not operate properly, press 

Ctrl

 + 

Alt

 + 

Del

 to restart the computer, or press the power switch to 

turn the power off, and then restart the PC-Diagnostic Utility.

Run this utility using the default settings in the Setup Utility.
If the Setup Utility or other settings will not allow hardware to be executed, the hardware icon will be displayed in gray.

1

Connect the AC adaptor, and turn on the wireless switch (  

page 133

).

During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices.

2

Turn on or restart the computer, and press 

F2

 or 

Del

 while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 
If you are using the computer after changing the settings from the status at the time of purchase, we recommend 
that you make a note of the settings that are changed.

3

Press 

F9

.

At the confirmation message, select [Yes] and press 

Enter

.

Regarding the PC-Diagnostic Utility

Operations

Touch pad operations

Internal keyboard operations

Select icon

Place the cursor above the icon

Press 

Space

, and then press   

   

 (  (close) cannot be selected)

Click the icon

Tap or click (right click cannot be used)

Press 

Space

 above the icon

Complete the PC-Diagnostics 
Utility and then restart the 
computer

Click  

(close)

Press 

Ctrl

 + 

Alt

 + 

Del

Running the Diagnostic Check

Summary of Contents for Toughbook CF-F9KWH011M














































































































































































































Reviews:

No comments

Related manuals for Toughbook CF-F9KWH011M

Gigabyte innote Q1580M User Manual preview
innote Q1580M
Brand: Gigabyte Pages: 387
Acer TravelMate P273-M User Manual preview
TravelMate P273-M
Brand: Acer Pages: 85
Acer TravelMate P645-S User Manual preview
TravelMate P645-S
Brand: Acer Pages: 99
Acer TravelMate 6252 Kasutaja Teatmik preview
TravelMate 6252
Brand: Acer Pages: 100
Acer TravelMate 250P series Manuel D'Utilisation preview
TravelMate 250P series
Brand: Acer Pages: 100
Acer One 14 Z8-415 User Manual preview
One 14 Z8-415
Brand: Acer Pages: 15
Acer BRnR 4000 4005WLMi Brochure & Specs preview
BRnR 4000 4005WLMi
Brand: Acer Pages: 39
Acer Predator 17 X User Manual preview
Predator 17 X
Brand: Acer Pages: 95
Acer P614-51 User Manual preview
P614-51
Brand: Acer Pages: 90
Acer PH16-71-97KT User Manual preview
PH16-71-97KT
Brand: Acer Pages: 106
Acer Aspire TimelineX 3820 User Manual preview
Aspire TimelineX 3820
Brand: Acer Pages: 313
Acer VN7-593G User Manual preview
VN7-593G
Brand: Acer Pages: 81
Panasonic Toughbook CF-50Y8KNUDM User Manual preview
Toughbook CF-50Y8KNUDM
Brand: Panasonic Pages: 40
Sony SVT13116FXS Specifications preview
SVT13116FXS
Brand: Sony Pages: 2
Sony SVT13114GXS Specifications preview
SVT13114GXS
Brand: Sony Pages: 2
Sony SVT13113FXS Specifications preview
SVT13113FXS
Brand: Sony Pages: 2
Sony SVT13112FXS Specifications preview
SVT13112FXS
Brand: Sony Pages: 2
Sony SVS15116FXB Specifications preview
SVS15116FXB
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands