10
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
You need to set the User Password.
Press
Ctrl
+
Alt
+
Del
to reboot the computer.
After shutting down by pressing the sleep switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer operates normally, go to [Start] - [Settings] - [Control Panel] -
[Add/Remove Programs] to delete the program. Then reinstall the program.
Computer hangs
Application Software
When using the computer as a network computer, additional settings may need to be set
depending on the usage conditions. Ask your system administrator or the person in charge
of the network.
The computer must be restarted if suspend or hibernation mode is entered.
Unable to connect to a net-
work
Network
[Enter Password] is dis-
played
[Advanced] menu can not
be registered
All or some items in [Secu-
rity] menu can not be regis-
tered
F9
does not work
[Coffee Break Password]
cannot be selected
Setup Utility
Try changing the mute by pressing
Fn
+
F4
.
Has the Setup Utility been used to set [Speaker] to [Disable]?(
"Setup Utility")
"Technical Information"
The sound is not heard
The volume of MIDI file
cannot be adjusted
Sound
Unusual Sound
The computer produces a
strange sound
If the computer enters the ECO mode or the LCD is closed while the computer is making
a sound, the computer may produce a strange sound, but this does not indicate a problem.
If the computer has not been used for a long period of time, it may produce an unusual
sound at start up. The sound may continue for a short period of time, but if the computer
starts up in a normal manner, then the problem is not serious. If, however, the computer
fails to start up, contact Panasonic Technical Support.
Did you open the CD-ROM drive or remove the MPEG CD while it was operating?
Re-insert the MPEG CD and close the CD-ROM drive. Press
Enter
.
A blue background appears
on the screen with the
MPEG image
MPEG File
Dealing With Problems
