![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-47-series/toughbook-cf-47-series_reference-manual_264547006.webp)
6
Function
Suspend function
Hibernation function
Where data is saved to Memory
Hard disk
Speed
Fast
Somewhat slow
Requires power supply Yes
(if power is cut, all data is lost)
Power is not required to maintain data
Suspend Mode
or
Hibernation Mode
Setting the Suspend or Hibernation Function
If you want to immediately start up and continue an application after shutting down your
computer, you can do so by using the suspend or hibernation function.
Starting Up Your Computer Quickly
Shutting Down Using the Suspend or Hibernation Function
Suspend/Hibernation Functions
Differences between the suspend and hibernation functions
The computer should be set for suspend or hibernation (
see the above procedure).
Press the sleep switch; at the "beep*" sound, release your finger.
(After releasing your finger from the
sleep switch, do not touch the sleep
switch or the power switch while the
computer is in the suspend or hiberna-
tion modes.)
[Hibernation] is factory set.
1
Run the Setup Utility
(
page 33
)
2
Using and , select [Power]
3
Using and , select [Sleep Switch] and press Enter
4
Press F10 , then select [Yes]
Using and , select [Suspend] or [Hibernation] and
press Enter
5
With Windows 98, the "Suspend" is called "Stand by".
NOTE
(To next page)
*
When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the
Setup Utility (
page 33
) or by the key combination
Fn + F4
, there will be no beep
sound.