![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-19kdraxcm/toughbook-cf-19kdraxcm_service-manual_270619032.webp)
9-9
2. Disconnect the 4 Cables from 4 Connectors.
3. Remove the 2 Screws <E36-15>.
4. Remove the LCD Back Plate and LCD PCB.
5. Remove the Digitizer.
6. Remove the LCD unit., then remove the LED Plate Holder
and LED module.
9.1.19. Removing WWAN Main Antenna
PCB, LAN-Main BT Antenna PCB,
LAN AUX Antenna PCB and WWAN
AUX Antenna PCB
1. Remove the 1 Screws <N1>.
2. Remove the WWAN Main Antenna PCB.
3. Remove the 2 Screws <N1>.
4. Remove the WLAN-Main BT Antenna PCB.
5. Remove the 1 Screws <N1>.
6. Remove the WWAN AUX Antenna PCB.
7. Remove the 2 Screws <N1>.
8. Remove the WLAN AUX Antenna PCB.
9. Remove the Pen
10. Remove the two Screws <K10-1-13>.
11. Remove the Pen Holder.
Screws <N1> : DFHE5025XA
Screws <NK10-1-13> : DRHM5025YAT
9.1.20. Removing the Each Cover
1. Remove the 14 Screws <N6>.
2. Remove the Modem/LAN LID Rubber, LAN LID Rubber,
USB
LID Rubber, DC IN LID Rubber, Serial LID Rubber, RGB
LID Rubber, Audio LID Rubber and USB Back Rubber.
3. Remove the Rear Cabinet.
(Refer to 7.1.5 Removing the Rear Cabinet)
4. Remove the 6 Screws <K12-16>.
5. Remove the Battery LID ASS'Y, HDD LID Ass'y and
PCMCIA LID Ass'y.
Screws <K12-16> : D3FKL
Screws <N6> : DRHM5025YA
<K10-1-13>
<N1>
<N1>
<N1>
<K10-1-13>
Pen Holder
WLAN Aux
Antenna PCB
WWAN Main
Antenna PCB
Pen
WWAN Aux
Antenna PCB
<N1>
<N1>
<N1>
WLAN-Main
BT Antenna
PCB
PCMCIA LID ASS’Y
DC IN LID Rubber
USB LID Rubber
LAN LID Rubber
Moden/LAN LID Rubber
Audio
LID Rubber
USB Back
Rubber
HDD LID ASS’Y
Battery
LID ASS’Y
<K12-16>
<K12-16>
<K12-16>
<K12-16>
<K12-16>
<N6>
<N6><N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
RGB
LID Rubber
Serial
LID Rubber