![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-19kdraxcm/toughbook-cf-19kdraxcm_service-manual_270619034.webp)
9-11
n
Assembly of LCD Back Damper (Application Model : Digitizer Model)
n
Assembly of LED PCB
<Note>
*Paste Sheets firmly. 20~30N(2.0~3.0Kgf)
ℴ
ℵ
Insert this between
LCD PCB & LCD Farme.
ℳ
Ⅎ
The form of the left and
the right isn't symmetrical.
Cross section A-A'
A'
A
Digitizer ASSY
LED PCB ASSY
0~0.5mm
0~1mm
0~1mm
0~1mm
After inserting the
connector, slide the
hook to lock
<Order of fixing screws>
㽲㸢㽳㸢㽴㸢㽵
Paste
Screw the Board and the
Spacer together.
Screw the Board and the
Spacer together.
Screw
Screw
Screw
Screw
Attach between the ribs
on the side of Frame.
Tape
LED PCB ASSY
LCD PWB Spacer
LCD Side Cushion
LED PCB
LED PCB
Sheet
LCD Back Cushion DA
LCD Back Plate DA
LCD Back Plate DA
Insert to the Digitizer as illustrated above to attach.
Insert the upper part of Digitizer Assy to the Plate.
Match to the center from
right and left to attach (± 1 mm).
Fit to the top edge of Plate.
Fit to the corner.
Fit to the corner.
Fit to the corner.
LCD BACK Cushion
LCD BACK
Cushion
LCD BACK
Cushion
LCD BACK
Cushion
LCD BACK
Cushion
LCD Side Cushion Lower
LCD Side Cushion Lower
Fit to the
corner.
Attach #12 on LCD PWB Spacer.
Digitizer PWB ASSY
Torque of tightening screw :0.16~0.20N.m(1.6~2.0kgf.cm)
Insert LED PCB to
the LCD Frame.
Fit LED Plate Holder
to the LCD Frame.
Insert the LED PCB to the
Pin of the LCD Frame.
Attachment Standard
1
䌾
3mm
0
㫧
0.5mm
Paste Tape after set the LED PCB,LED Plate Holder
Tape
LED PCB
LED Plate
Holder
Insert the tip of LED Plate Holder
to the LCD Frame.