![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-19kdraxcm/toughbook-cf-19kdraxcm_service-manual_270619042.webp)
9-19
n
Assembly of Display Unit
9.2.7.
Setting the Pad PCB and SW PCB
1. Attach both the SW PCB and the Operation Sheet to the
Cabinet.
2. Connect the 3 Cables to the 3 Connectors.
(CN800,CN805,CN807)
3. Fix the Pad PCB using the 4 Screws. <N1>
Note:
Tighten the Screws in the numbered order (No1 to
No4).
Screws <N1> : DFHE5025XA
Screw
㶎
LCD Unit
A
Ⅎ
ℳ
ℴ
ℵ
Screw
Screw
Screw
Pass the Cable through
the groove of cushion
Caution: Running over
affects waterproof perf-
ormance.
Set to the Top Case Ass'y
Set to the Top Case Ass'y
Set to the Top Case Ass'y
Insert all of antenna cables into
the notch of the board.
LCD Cable
Insert position
Torque of tightening screw :1.5
r
0.15N
m(
ѳ
15.0
r
1.5kgf
cm)
Black / White
Green
Blue / Glay
㽲㸢㽳㸢㽴㸢㽵
<Order of fixing screws>
Note
Avoid much stress on the Cable.
Details of "A"
Close the LCD with the
Hinge hooked on the
Top Case, and then
fold back.
SW PCB
Operation Sheet
<N1>:No.3
Pad PCB
Connector(CN807)
Connector(CN805)
<N1>:No.2
<N1>:No.1
<N1>:No.4