29
English
●
When removing the USB memory device, note the
following.
•
When the access indicator of the connected USB
memory device is blinking, it shows the display is
loading the data. Do not remove the USB memory
device while blinking.
•
Depending on the USB memory device, the access
indicator may remain blinking even when it is not
being accessed, or the device is not equipped
with an access indicator function, etc. In this case,
remove the USB memory device after confirming
the following or .
Switch the input to an input other than [USB]
and [MEMORY VIEWER], and confirm that the
functions that access USB memory device are
finished. The functions are, read user image
function (see page 68), playlist edit function
(see page 109), data cloning function (see page
121), etc.
Turn the unit off.
•
Do not frequently repeat connecting/disconnecting
the USB memory device. Wait at least 5 seconds
after connection, and then remove the USB
memory device. Before reconnection, wait at least
5 seconds. A certain length of time is required
so that the display can recognise that the USB
memory device is switched for connection or
disconnection.
•
If the power of this unit is turned off or the USB
memory device is removed accidentally while
accessing data, the data may not be accessed
next time the USB memory device is used.
In such a case, turn the power of the main unit off
and on.
●
When the power is supplied from MP2 (DC 5V 2A),
use a cable supporting a current of 2A or more.
Speaker terminal connection
Use 8
Ω
/15 W speaker.
Red
Black
While pressing the
lever, insert the core
wire.
Return the lever.
