130
English
Corresponding
signal
Resolution
(Dot)
Scanning
frequency
Dot clock
frequency
(MHz)
Format
*
2
Plug and Play-supported signal
*
5
Horizontal
(kHz)
Vertical
(Hz)
HDMI
DL DP
DVI-D/
PC
EDID
1
EDID
2
EDID
3
EDID
4
1920 x 1080/60 1 920 x 1 080
*
3
66.59 59.93 138.50 R/D/H/DL/DP
1920 x 1080/60 1 920 x 1 080
67.50 60.00 148.50 R/D/H/DL/DP ○
○
○
○
○
○
○
1920 x 1200/60 1 920 x 1 200
74.04 59.95 154.00 R/D/H/DL/DP ○
○
○
○
○
○
○
1920 x 2160/60 1 920 x 2 160
133.29 59.99 277.25 H/DL/DP
1920 x 2160/60 1 920 x 2 160
135.00 60.00 297.00 H/DL/DP
2560 x 1440/60 2 560 x 1 440
88.79 59.95 241.50 H/DL/DP
○
○
○
2560 x 1600/50 2 560 x 1 600
82.37 49.95 286.00 H/DL/DP
2560 x 1600/60 2 560 x 1 600
98.71 59.97 268.50 H/DL/DP
3840 x 1080/60 3 840 x 1 080
66.63 59.97 266.50 H/DL/DP
3840 x 2160/60 3 840 x 2 160
133.31 60.00 533.25 H/DL/DP
○
3840 x 2160/30 3 840 x 2 160
65.69 29.98 262.75 H/DL/DP
○
*
1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*
2: Signals to represent formats are as follows.
R : D-sub RGB (PC IN)
Y : YP
B
P
R
/YC
B
C
R
(PC IN)
D : DVI-D (DVI-D IN)
H : HDMI (HDMI 1, HDMI 2)
DL : DIGITAL LINK (DIGITAL LINK)
DP : DisplayPort (DisplayPort)
The analogue input supports onG and onY.
*
3: Based on VESA CVT-RB (Reduced Blanking) standard
*
4: YC
B
C
R
420 format only supported.
*
5: Signals with ○ in the Plug and Play-supported signal column are the ones written in EDID (Extended Display
Identification Data) of this unit.
For signals without ○ in the Plug and Play-supported signal column, resolutions may not be selected on the PC
side even if this unit supports those signals.
Note
●
An auto detected signal format may be differently displayed from the actual input signal.
●
[ i ] shown after the number of dots of resolution means the interlace signal.
●
When 1080/30PsF signal and 1080/25PsF signal are input, they are processed as 1080/60i signal and 1080/50i
signal, and then displayed.
●
When 1920 x 2160/60 signal (dot clock frequency 297.00 MHz, DIGITAL LINK format) is input, 3840x2160/60p is
displayed.