33
English
■
Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
’No activity power off’ is enabled.
When [No activity power off] in the [Setup] menu is set to
[Enable], a warning message is displayed every time the
power is turned ON. (see page 94)
“Power management” information
Last turn off due to ’Power management’.
When “Power management” is functioned, an
information message is displayed every time the power
is turned ON. (see page 89)
Display reverse installation information
The display is upside-down.
When it is judged that the display is reversely installed,
an information message is displayed when the power is
turned ON. (see page 83)
These message displays can be set with the following
menus:
●
[Power on settings] menu
Information(No activity power off)
(see page 82)
Information(Power management)
(see page 82)
Information(Display upside-down)
(see page 83)
COLOR UNIVERSAL DESIGN
Information
’Color universal design’ is enabled.
The information is displayed when [Setup] - [Color
universal design settings] - [Color universal design] is
set to [On]. (see page 104)
Selecting the input signal
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Unit
Switches input every time the buttons are pressed.
PC
Full
[HDMI1
] → [
HDMI2
] → [
HDMI3
] → [
DisplayPort
] →
[
DVI-D
] (or [SLOT
]) → [
PC
] → [
Screen Transfer
] →
[USB
] → [MEMORY VIEWER] → [
WHITEBOARD]
[HDMI1]: HDMI IN 1 terminal, HDMI input
[HDMI2]: HDMI IN 2 terminal, HDMI input
[HDMI3]: HDMI IN 3 terminal, HDMI input
[DisplayPort]: DisplayPort IN terminal, DisplayPort
input
[DVI-D]
*
: DVI-D IN terminal, DVI-D input
[SLOT]
*
: Input signal of the function board
[PC]: PC IN terminal, PC input
[Screen Transfer]: Input that displays images transmitted
via network using “Screen Transfer”, a
dedicated application by Panasonic
[USB]: USB terminal, USB input
[MEMORY VIEWER]: USB terminal, “Memory viewer”
input
[WHITEBOARD]: The screen switches
“WHITEBOARD” input.
*
: For [DVI-D] and [SLOT] input, either one selected for
the [DVI-D/SLOT select] setting is displayed. (see
page 108)
Note
●
Displays the signal name as set in [Input label]. (see
page 88)
●
Input will not be switched unless [Input lock] is set to
[Off]. (see page 93)
●
Image retention may occur on the LCD liquid crystal
panel when a still picture is kept on the panel for
an extended period. To prevent such a problem,
using the screensaver and the [Wobbling] function is
recommended. (see page 87, 88)
