Panasonic TH-65BQ1W Operating Instructions Manual Download Page 105

Page: 105 / 166

105

English

A confirmation screen is displayed.

Select [Yes] to apply the setting.

Color universal design settings

Color universal design settings are changed.
New settings will take effect the next time the power

is turned on.

Yes

Note

●

After the setting is changed, the changed setting will

be applied after the power is turned on next time.

●

When it is set to [On], a message is displayed at

startup.

OSD settings

Makes various settings for the on-screen menus.

■

[Menu display duration]

Sets the display duration time for the on-screen menu.

[5 sec] to [180 sec]

■

[Onscreen display]

Set to display / hide the following Onscreen display.

●

Power on display

●

Input signal switch display

●

No signal display

●

No external media display (at USB input)

●

MUTE display after displaying the menu screen

●

Off timer remaining time display when 3 minutes

remaining

●

Display when responding to commands from external

control

[On]:

Displays the Onscreen display.

[Off]:

Hides the Onscreen display.

■

[OSD transparency]

Sets the transparency rate of the on-screen display

background.

0 to 100

■

[OSD memory]

Sets whether or not to hold the cursor position on the

menu screen.

[Off]:

The cursor position is not held.

[On]:

The cursor position is held.

Note

●

Even if it is set to [On], if the power of the main unit is

turned off, the cursor position is not held.

Options

This menu displays the information of this unit, and

restores data to the factory default state.
[Options] - submenu screen

Display information

Options

Software licenses

Cloning password

USB data cloning

Security password

LAN data cloning

Output log data

Shipping

■

[Display information]

Displays the serial number and software version of this

unit.

■

[Software licenses]

Displays the software license.

■

[Cloning password]

Sets the password for the cloning function.
For more detail of the settings, see “Changing the

cloning password”. (see page 151)

Note

●

The initial password in the factory default state is

[AAAA].

●

Change the password periodically, and set one which

is difficult to guess.

●

For initialization method for the cloning password,

consult the dealer where you purchased the product.

■

[USB data cloning], [LAN data cloning]

Copies the data of a single display to multiple displays

by using the USB memory device or via LAN. For more

detail of the settings, see “Using data cloning”. (see

page 147)

■

[Output log data]

Saves a log for servicing to the USB memory device.

■

[Security password]

Set a password to protect the settings of this unit.

Security password
Security password

Save

Password

********

Off

[Security password]

[Off]:

Disables security password control.

[On]:

Enables security password control.

Summary of Contents for TH-65BQ1W







































































































































































Search results

Summary of Contents for TH-65BQ1W

Reviews:

Related manuals for TH-65BQ1W

Brands by name

Popular brands

Panasonic TH-65BQ1W, Operating Instructions Manual

Search results

Summary of Contents for TH-65BQ1W

Reviews:

Related manuals for TH-65BQ1W

Brands by name

Popular brands