47
English
■
[Component/RGB-in select]
This menu is displayed at PC IN and COMPONENT/
RGB IN inputs.
Select to match the signals from the source connected
to each terminal.
[Component]
YP
B
P
R
/YC
B
C
R
signals
[RGB]
RGB signals
Note
●
Set for each input terminal (COMPONENT/RGB IN,
PC IN).
■
[YUV/RGB-in select]
This menu is displayed at HDMI 1, HDMI 2, DIGITAL
LINK and DVI-D IN inputs.
Select to match the signals from the source connected
to each terminal.
[YUV]
YUV signals
[RGB]
RGB signals
Note
●
Set for each input terminal (HDMI 1, HDMI 2,
DIGITAL LINK, DVI-D IN).
■
[Sync]
This menu is displayed at PC IN input.
Setting RGB/PC sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected. When both of them have
sync signal, H and V sync will be selected.
When displaying CS signal, connect to HD input
terminal.
[on G]:
Uses a synchronized signal on the Video G signal,
which is input from the G connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
Setting Component sync signal
[Auto]:
The H and V sync or synchronized signal is
automatically selected. When both of them have
sync signal, H and V sync will be selected.
When displaying CS signal, connect to HD input
terminal.
[on Y]:
Uses a synchronized signal on the Video Y signal,
which is input from the Y connector.
[HV sync]:
Uses a synchronized signal on the Video HD/VD
signal, which is input from the HD/VD connector.
■
[Cinema reality]
Faithfully reproduces videos shot with cinema films.
Set this to [Off] normally.
Note
●
In [ENGLISH(US)] OSD language, [Cinema reality]
is displayed as [3:2 PULLDOWN].
●
If [Cinema reality] is set to [On], videos including
movies shot at 24 frames per second are
reproduced more naturally.
●
If the video is unnatural with [On] set, set it to [Off].
■
[Noise reduction]
Reduces picture noise.
[Off]:
Disables Noise Reduction.
[Min], [Mid], [Max]:
Sets strength of Noise Reduction.
[Auto]:
Noise reduction will be automatically selected from
[Min], [Mid] or [Max].
■
[MPEG noise reduction]
Reduces block noise and mosquito noise on MPEG
videos.
[Off]:
Disables Noise Reduction.
[Min], [Mid], [Max]:
Sets strength of Noise Reduction.
■
[XGA mode]
This menu is displayed at PC IN and COMPONENT/
RGB IN inputs.
This unit supports XGA signals (1024 × 768, 1280 ×
768, 1366 × 768) having different aspect ratios and
sampling rates.
[Auto]:
Automatically detects the signal.
Switch the setting to suit the input signal for better
display depends on the angle of view or display
resolution condition.
Note
●
After making this setting, be sure to make each
adjustment (such as [Auto setup]) on the [Position]
menu as necessary. (see page 37)
